fbpx
Print this page
Friday, 10 November 2023 08:55

Bigger booms add more bang

Written by  Mark Daniel
The new Super L3 boom on the UX5201 increases the maximum working width to 48 metres. The new Super L3 boom on the UX5201 increases the maximum working width to 48 metres.

At next week’s Agritechnica Event – in Hanover, Germany – Amazone will showcase several tweaks to its sprayer line-up, alongside the arrival of some new additions.

One such ‘newbie’ will be the Panterra 7004, with a tank capacity of 6,600 litres. It joins the existing 4504 and, like the 4,500 litre version which is now adorned with the latest Claas supplied cab, the big self-propelled sprayer shares the same ‘wet’ setup controls and spraying hardware.

However, there is some differentiation. It comes with a new chassis that uses a trailing arm linkage at each corner. This is said to ensure that the wheels stay in contact with the ground. However, the hydraulic pneumatic suspension provides slope compensation, working in a similar manner to hillside levelling on a combine – so the machine remains level at all times.

Other highlights include a hydraulic track width adjustment to accommodate different track widths but, that also allows the rear wheels to be extended slightly wider than those at the front, allowing the tyres to travel on fresh ground.

Already seen on the UX01 machine, Direct Inject will also be available on both self-propelled models. The system allows a second product to be added while spraying, where a blanket application approach is not warranted.

When combined with application maps, the system can respond more quickly to maximise chemical saving.

Looking at the trailed model offering, the new Super L3 boom on the UX5201 increases the maximum working width to 48m. Featuring a fourfold design, the inner sections are steel and the outer aluminium to save weight on the 30-45m layouts. For the widest 48m version, the second to last section is constructed from lightweight carbon fibre.

The Super L3 also features a new boom control system to reduce fore and aft movement. With the UF02 mounted sprayers now having the option of swapping out the mechanical control to an active hydraulic setup.

This option will be offered on booms wider than 27m as Contour- Control, bringing independent left and right boom raise or lower movement to maintain an even spraying height on uneven ground.

More like this

Vapormatic joins JD's parts range

John Deere has expanded its repair and replacement part offerings, with the Vapormatic brand officially added to its range of ‘Alternative Parts’ in New Zealand.

GPS in control

In a move that will make harvesting operations easier, particularly in odd-shaped paddocks, Kuhn has announced that GPS section control is now available on the FC 9330 RA mower conditioner, the GA 13231, and GA 15231 four-rotor rakes.

Tractor, harvester IT comes of age

Over the last halfdecade, digital technology has appeared to be the “must-have” for tractor and machinery companies, who believe that bringing IT to tractors and farming will offer its customers huge benefits.

Spot fertiliser applicator keeps costs in check

The Kverneland Pudama principle delivers spot placement of fertiliser in maize, rather than continuous fertiliser placement. As a result, it has the capability to deliver a 25% saving on starter fertiliser, with no noticeable loss of yield.

Featured

MPI cuts 391 jobs

The Ministry for Primary Industries (MPI) has informed staff it will cut 391 jobs following a consultation period.

National

Fonterra appoints new CFO

Fonterra has appointed a new chief financial officer, seven months after its last CFO’s shock resignation.

Machinery & Products

GPS in control

In a move that will make harvesting operations easier, particularly in odd-shaped paddocks, Kuhn has announced that GPS section control…