fbpx
Print this page
Friday, 13 June 2025 07:55

RainWave set to cause a splash

Written by  Mark Daniel
The Nevada RainWave can spread large droplets far and wide. The Nevada RainWave can spread large droplets far and wide.

Traditional spreading via tankers or umbilical systems have typically discharged effluent onto splash-plates, resulting in small droplet sizes, which in turn lead to odours, but probably more importantly, the loss of nitrogen by volatilisation.

The Nevada RainWave, originally developed by a German farmer in response to the banning of conventional splashplates in Europe, is said to result in a larger droplet size and the ability to spread wide, despite running low pressures and high flow rates.

The oscillating spreading head, not unlike the design of a traditional garden sprinkler, moves left to right as effluent hits the plate, creating large droplets that fall gently to the ground, in what is described as a “rain-like” manner. The action is said to reduce wind-drift and evaporation, so is particularly useful near watercourses or urban developments.

Spreading width can be adjusted from 6 to 18 metres, with a range of spreader heads, and the ability to deals with outputs of up to 200 cubic metres per hour. The benefits of a widespread allows application depths to be cut to as low as 1mm, for rapid absorption and reduced ponding, while also allowing operators to reduce speeds to less than 7km/h.

The option, said to deliver more than double the output of a conventional splash plate, is “driven” by the flow of effluent, has minimal maintenance requirements other than a regular greasing and is said to create very little contamination to the grass sward, allowing re-grazing over a shorter cycle.

Available for use with most makes of tankers or umbilical systems and able to deal with solids content up to 20%, the use of stainless steel throughout, is said to offer low maintenance and an extended service life.

www.nevadagroup.co.nz

More like this

Tractor Sales Fall in Most Major Markets Ahead of EIMA 2026

The market is in decline in the United States, Canada and Brazil. In Europe, sales are falling in Germany, France and Spain. Turkey is experiencing a sharp decline, whilst the economic strategies and policies implemented by India and China are driving purchases in both countries.

Waikato Dairy Family Uses John Deere Precision Tech

Areare Farms, a dairy operation in the Waikato region spanning multiple properties and milking 760 cows, now has Jenna and her brother Brian Rogers, the third generation of the family business, working alongside their parents Phil and Jackie.

SAM e-Spreader Now Connects Directly to Tabula

Hamilton-based manufacturer SAM Machinery and Hawke’s Bay’s Tabula have joined forces to offer customers more ways to connect its spreaders with the technology they already use in the cab.

Claas Balers Turn 30

Claas built its first variable chamber round baler - the Variant 100 - in 1996, so 2026 marks 30 years and the fifth generation of the Variant name, recently complemented by the new Cerex Series introduced in 2025.

Featured

MPI's Diana Reaich on Non-Tariff Barriers and Trade Access

The head of the Ministry for Primary Industries (MPI) trade and international relations group says New Zealand is well-positioned to secure trade access and compete internationally as the world becomes more complicated, demanding and uncertain.

National

Machinery & Products