fbpx
Print this page
Thursday, 16 June 2022 12:55

Pasture mowing, topping, help lift bottom line

Written by  Mark Daniel
The Trimax Topper was developed on a Waikato dairy farm in 1993 and has become a mainstay for many operators. The Trimax Topper was developed on a Waikato dairy farm in 1993 and has become a mainstay for many operators.

Mowing or topping dairy grazing pastures can improve pasture quality and increase cows’ productivity by simplifying pasture management, speed up regrowth for a consistent supply, allow increased stocking rates and reduce the reliance on bought-in feeds.

With all these facets likely to prove advantageous to a farm’s bottom line, it’s obviously important to choose a machine that’s up to the job.

Trimax Mowing Systems is a New Zealand company that designs, manufactures, and distributes premium commercial mowing equipment around the world. Founded in the Bay of Plenty in 1981, the company recently celebrated 40 years of business at its headquarters in Tauranga.

Trimax suggests machine choice should be governed by the cleanliness of cut across the leaf, the dispersal of clippings and the ability to travel without scalping. They also say it is sensible to look at a wide range of cutting heights, allowing mowing and topping, ease of maintenance and good aftermarket support for parts and operational support.

Their topping solution, the Trimax Topper, was developed on a Waikato dairy farm in 1993 and has become a mainstay for many operators, offered as the 237 and 282 models, with working widths of 91 and 107 inches respectively.
At the heart of each machine, a 4-spindle layout and screw adjusted side skids offer adjustable cutting heights from 20 to 160mm, with typical outputs of 1.39 and 1.64 ha/hour at a typical 6km/h forward speed.

The four-rotor layout, combined with high spindle speeds, delivers a greater number of cuts per metre travelled, resulting in a finer cut and neater finish. This is also helped by the fitment of the company’s Lazerbladez, manufactured from heavy-duty spring steel and featuring a fling tip that is easier to fit and less expensive to maintain than typical full-width designs. They are also tilted forwards at an optimal angle to ensure better grass lift and rearward discharge.

The general layout has a short front-to-rear distance, allowing close coupling to the tractor and a high underbody clearance to make sure cut grass is cleanly ejected. An optional full width roller assembly can be fitted to eliminate scalping on uneven terrain. Weighing 620 and 640kg, the 237 and 282 machines require around 45 and 60hp and feature an industry leading three-year warranty.

www.trimaxmowers.co.nz. 

More like this

Tractor Sales Fall in Most Major Markets Ahead of EIMA 2026

The market is in decline in the United States, Canada and Brazil. In Europe, sales are falling in Germany, France and Spain. Turkey is experiencing a sharp decline, whilst the economic strategies and policies implemented by India and China are driving purchases in both countries.

Waikato Dairy Family Uses John Deere Precision Tech

Areare Farms, a dairy operation in the Waikato region spanning multiple properties and milking 760 cows, now has Jenna and her brother Brian Rogers, the third generation of the family business, working alongside their parents Phil and Jackie.

SAM e-Spreader Now Connects Directly to Tabula

Hamilton-based manufacturer SAM Machinery and Hawke’s Bay’s Tabula have joined forces to offer customers more ways to connect its spreaders with the technology they already use in the cab.

Claas Balers Turn 30

Claas built its first variable chamber round baler - the Variant 100 - in 1996, so 2026 marks 30 years and the fifth generation of the Variant name, recently complemented by the new Cerex Series introduced in 2025.

Featured

Students' Strobe Light Targets Nesting Birds in Tractors

During the nesting season, from September to December, industrious starlings can quickly build nests in the darker areas behind tractor and vehicle, usually close to hot engines, typically resulting in localised damage or in some cases complete write-offs.

NZ Tractor Deliveries Up 5% Year to Date to September

With the last couple of months having seen some potential tractor purchases put on hold with the impending election and continued input cost rises, year-to-date figures, ending September, has seen deliveries up around 5% over the same period in 2025, with a total of 2026 units.

MPI's Diana Reaich on Non-Tariff Barriers and Trade Access

The head of the Ministry for Primary Industries (MPI) trade and international relations group says New Zealand is well-positioned to secure trade access and compete internationally as the world becomes more complicated, demanding and uncertain.

National

Machinery & Products