fbpx
Print this page
Friday, 21 October 2022 12:55

Third arm offers a helping hand

Written by  Mark Daniel
The Third Arm was recently showcased at the Irish Ploughing Competition. The Third Arm was recently showcased at the Irish Ploughing Competition.

Sometimes the simplest designs can have a dramatic effect on making a job so much easier.

Who hasn’t encountered problems when hooking up a tractor to a close-coupled implement like a fertiliser spreader or sprayer – particularly those with any degree of girth?

In practice, it’s often near impossible to get the tractor’s rear linkage arms lined up with the linkage pins on the implement, meaning there’s a need to enter the ‘crush zone’ between the rear fender and the implement, raising questions around safety, particularly if a second person is helping. Of course, an operator can resort to the farmer’s friend, baler twine, but it’s not an ideal situation.

The Third Arm, recently showcased at the Irish Ploughing Competition, was designed by beef and sheep farmer Phillip Dixon to allow a tractor driver to stay safely in the tractor seat and adjust the rear linkage arms to line up with the pins on the implement, before reversing into the ideal attachment position.

Weighing in at only 3.5kg and intended for Cat 1 to 3 systems, the device drops over the linkage arms and uses a linear motor to move the arms inwards or outwards to the ideal position, offering up to 200mm of electrical movement or 150mm of mechanical adjustment.

In operation, the device is dropped over the link arms, secured with turn screws and plugged into the tractor’s auxiliary electrical supply. From the seat, the operator uses a small key fob to move the arms to the desired position, ready for attaching and securing with a lynch pin. Once the link arms are secured, the Third Arm is removed, stowed away and any stabiliser secured.

Whilst originally designed with safety in mind, by removing operators from the ‘crush zone’ it also offers convenience and time saving, while removing the need for a second to become involved with hooking up implements. It also means that anyone who has put a few pounds on over winter, won’t need to take up a crash diet for the spring campaign.

More like this

Tractor Sales Fall in Most Major Markets Ahead of EIMA 2026

The market is in decline in the United States, Canada and Brazil. In Europe, sales are falling in Germany, France and Spain. Turkey is experiencing a sharp decline, whilst the economic strategies and policies implemented by India and China are driving purchases in both countries.

Waikato Dairy Family Uses John Deere Precision Tech

Areare Farms, a dairy operation in the Waikato region spanning multiple properties and milking 760 cows, now has Jenna and her brother Brian Rogers, the third generation of the family business, working alongside their parents Phil and Jackie.

SAM e-Spreader Now Connects Directly to Tabula

Hamilton-based manufacturer SAM Machinery and Hawke’s Bay’s Tabula have joined forces to offer customers more ways to connect its spreaders with the technology they already use in the cab.

Claas Balers Turn 30

Claas built its first variable chamber round baler - the Variant 100 - in 1996, so 2026 marks 30 years and the fifth generation of the Variant name, recently complemented by the new Cerex Series introduced in 2025.

Featured

Students' Strobe Light Targets Nesting Birds in Tractors

During the nesting season, from September to December, industrious starlings can quickly build nests in the darker areas behind tractor and vehicle, usually close to hot engines, typically resulting in localised damage or in some cases complete write-offs.

NZ Tractor Deliveries Up 5% Year to Date to September

With the last couple of months having seen some potential tractor purchases put on hold with the impending election and continued input cost rises, year-to-date figures, ending September, has seen deliveries up around 5% over the same period in 2025, with a total of 2026 units.

MPI's Diana Reaich on Non-Tariff Barriers and Trade Access

The head of the Ministry for Primary Industries (MPI) trade and international relations group says New Zealand is well-positioned to secure trade access and compete internationally as the world becomes more complicated, demanding and uncertain.

National

Machinery & Products