increase font size
Valtra has released the sixth-generation S-Series tractor range for Australia and New Zealand.
Manufactured at its Suolahti factory in Finland, Valtra has released the sixth-generation S-Series tractor range for Australia and New Zealand.
The Series gains a new engine, transmission and cabin from the previous version, with six models from 280–416hp, each powered by a new Agco- Power 8.4 litre engine which, says Mark Hamilton- Manns, product marketing manager for Valtra in ANZ, meets Stage V regulations without the need for EGR (Exhaust Gas Recirculation).
“Using SCR (AdBlue) and avoiding EGR improves the engine’s combustion efficiency and means the engine runs cooler,” he says.
A single turbocharger layout and long-stroke engine develops maximum power at 1,850rpm, with peak torque produced at only 1,500rpm. The flagship S416 produces up to 1,750Nm of torque – 9% more than its predecessor, while fuel consumption is reduced by 3%. In operation, the S416 always has maximum power and torque. Its siblings have between 20–30hp boost for specific operating conditions where PTO, implement or transport conditions require additional power.
The ML260 CVT transmission, with field and transport operating ranges, uses an upgraded hydraulic pump and heavy-duty PTO drive train, while the rear axle diameter is increased to 125mm to handle the higher torque output and effective power delivery to the ground.
“Combining the new engine with the updated transmission increases efficiency, and fuel consumption is reduced, compared to its predecessor,” says Mark Hamilton-Manns.
The S6-Series shares a similar cab frame to the latest N, T and Q Series models, offering improved air distribution at various levels around the cab, with the option of TwinTrac, reverse drive controls, or the Skyview cab for greater vertical visibility.
Valtra Unlimited features will be available for all sixth generation S Series models, including the popular Central Lubrication System (CLS) and Central Tyre Inflation System (CTIS). The latter is controlled via ISOBUS and displays actual tyre pressures on the SmartTouch screen.
The SmartTouch user interface is available with features including Smart- Turn automatic headland turning, offering Part Field Mode, U-Turn, Y-Turn and K-Turn turning patterns.
“Our SmartTouch user interface makes Valtra smart farming technology the easiest in the market. We are working on new technology features which will soon benefit our customers,” explains Mark.
The S6 wheelbase is 93mm longer than the recently released Q-Series tractors at 3,092mm, with weight distribution without ballast at 45% on the front axle and 55% to the rear, with a maximum gross operating weight of eighteen tonnes.
A rear linkage lift capacity of 12 tonnes is complemented by the optional front linkage with a maximum lift of 5.8 tonnes. Hydraulic oil requirements are met with the base Eco unit producing two hundred litres/min at just 1,650rpm, while the option of twin 200 l/min pumps is available, with six ESCVs including one with flow rates up to 170 litres/min.
The S6 has separate transmission and hydraulic oils, importantly eliminating oil contamination from shared implements damaging the transmission, with reduced service costs due to the long oil change intervals.
Twin rotor swathers have become the ‘go-to’ for forming swaths to feed hungry harvesters and balers, however, the design layout often means that crop located between the two rotors is not picked up, turned over or incorporated into the swath formed for subsequent harvesting.
Operating large tractors became more expensive back in March due to the ongoing Strait of Hormuz conflict, meaning contractors had to introduce fuel surcharges and farmers had to adjust their budget forecasts.
Close to the Abel Tasman and Kahurangi National Parks, Motueka is known for apples, pear and kiwifruit orchards, alongside specialised crops such as hops. Indeed, that specialisation, saw the area being the New Zealand centre of the tobacco growing, until the early 1980s.
Can-Am has introduced its 2027 range of side-by-side vehicles (SSV) and all-terrain vehicles (ATV), including the industry leading Defender, the Maverick R and the hugely capable Outlander ATV, incorporating a host of advancements designed to deliver an exceptional riding experience.
With battery tools becoming more widespread and more importantly, productive and reliable, it was only time before we saw augers or post-hole borers.
LIC shareholders have elected a new North Island representative to the co-operative's Board, along with five representatives to its Shareholder Reference Group (SRG), following the company's Annual Meeting held in Invercargill.
Farmers across parts of Southland and South Otago are continuing to deal with difficult conditions after a prolonged run of wet weather, with pressure building around feed supply, stock management, pasture damage, farm infrastructure and everyday workloads.
Federated Farmers says it welcomes Labour's commitment to reviewing the Sharemilking Agreements Act, calling on other major parties to do the same.
For Canterbury dairy farmers Sian Meijer and Rick Wobben, wearable technology has become one of their most valuable on-farm tools - helping manage 1850 cows across an expansive, high-performing dairy operation while improving efficiency, mating outcomes and day-to-day decision making.
Fonterra has unveiled its annual results for the 2026 financial year, posting $27 billion in revenue and close to $20 billion returned to New Zealand farmer owners and unit holders.
The first major update to the Dairy Cattle Code of Welfare in more than a decade has been released, marking what DairyNZ describes as an important step in ensuring animal welfare standards continue to evolve alongside scientific evidence and on-farm realities.
