fbpx
Print this page
Thursday, 29 August 2019 11:16

New harvesters at the cutting edge

Written by  Mark Daniel
The Claas Lexion 8900 in action. The Claas Lexion 8900 in action.

New CLAAS Lexion 8000 and 7000 series combine harvesters have arrived in Australasia, reports Claas Harvest Centre.

CLAAS claims the new series has 10% more capacity than its 700 range, which is known as the world’s most productive combine harvester.

Launched in 1995 after ten years development, the Lexion 480 was the first combine harvester to use Claas’ APS Hybrid threshing and separation system. 

APS (accelerated pre-separation system) smoothly accelerates crop flow across all concave areas, resulting in 70% of separation occurring before the crop reached the twin longitudinal rotors. Claas is still the only manufacturer to offer both systems in one machine. 

The latest Lexions use a new APS Synflow Hybrid system in which the threshing drum diameter is increased from 600 to 755mm and the feed impellor upsized from 375 to 600mm. 

Likewise, the capacity of the twin rotor secondary grain separation area is 20% bigger. 

Grain tank and unloading maximum capacities are also bigger -- 18 tonnes and 180 L/second, respectively.

The 7600, 7700 and 8700 models are fitted with 12.5 L, 6-cylinder Perkins 2206D engines, delivering a maximum output of 461, 524 and 571 hp, respectively. The 8800 model has a 15.6 L, 6-cylinder Mercedes-Benz engine delivering 653 hp.

The machines have the maker’s Dynamic Cooling and Dynamic Power systems. The former is on-demand, variable rate cooling said to save up to 26hp. The latter uses advanced engine management to adjust power output to operating conditions and cut fuel use by up to 10%.

Both series can be equipped with the Terra Trac system in 635, 735- and 890 mm operating widths or conventional tyres measuring 2.15 m front and 1.75 m rear. 

Both variants are capable of 40 km/h ground speed for speedy on-road transport. 

On-board technology includes the Cemos Auto machine optimisation system which continuously reviews and automatically adjusts the threshing, cleaning and separation settings for maximum throughput, grain quality and fuel efficiency. 

The system is said to achieve 20% greater output than by manual operation.

Claas Telematics, standard on all machines, enables GPS tracking and data transmission for machine optimisation, harvesting logistics, fleet management, remote diagnostics and documentation.

Up front, the Lexion 8000 &7000 models can be equipped with Claas’ Vario variable cutter bar or the new Convio front, both available in 10.8, 12.3 or 13.8 m cutting widths. 

Vario cutter-bars can adjust the knife position from -10 cm to +60 cm ‘on the go’ for optimum throughput, flexibility and ease of operation.

Convio fronts are said to offer smooth, reliable crop flow with minimal grain loss, even in lighter conditions or direct cut Canola. 

The optional Flex configuration allows the cutter bar to flex up to 90 mm upwards or 135 mm downwards, said to make it ideal for harvesting pulse crops or lodged cereals.

All models are fitted with Jetstream, the maker’s eight- or six-stage turbine system that blasts air over dual-ventilated steps for pre-cleaning and the full length of the sieve box. Optional 3D or 4D cleaning systems automatically adjust the blower speed according to the lateral and longitudinal angle of the machine.

Rural News understands new straw walker machines will arrive in 2020. These would include the 5000 (5-walker) and 6000 (6-walker) series.

More like this

Claas rings up some big numbers

The Claas Group finished fiscal year 2023 with a substantial leap in sales that reflected the high demand for agricultural equipment.

'Claasy' hybrid combine harvester

Harvesting and tractor specialist Claas has developed and field tested a combine harvester fitted with a part electric drive system.

20 years of tractor production

Claas has marked the 20th anniversary of entering the global tractor market with the production of its 200,000th tractor at its French Le Mans facility.

New triple-combos from Claas

Claas has closed the gap in the DISCO 9200/9300 and the DISCO 1100 wide mower ranges, with the arrival of the new 9700 range triple set up.

Featured

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

Editorial: Passage to India

OPINION: Even before the National-led coalition came into power, India was very much at the fore of its trade agenda.

National

Knowing bugs means fewer drugs

A mastitis management company claims to deliver the fastest and most accurate mastitis testing available at scale for New Zealand…

Machinery & Products

100 years of Farmall Tractors

Returning after an enforced break, the Wheat and Wheels Rally will take place on the Lauriston -Barhill Road, North-East of…

JD unveils its latest beast

John Deere has unveiled its most powerful tractor ever, with the launch of the all new 9RX Series Tractor line-up…

Biggest Quadtrac coming to NZ!

In the biggest announcement that Case IH Australia/New Zealand has made around its tractor range, its biggest tractor is about…

A different shade of blue for Norwood

Norwood and ARGO Tractors, the Italian manufacturer of Landini and McCormick tractors, have announced an agreement that gives Norwood exclusive…

Kubota tests diesel engines

Kubota last month used the UK LAMMA Show to test the water with its new 200hp, four-cylinder 09-series diesel engines.