fbpx
Print this page
Monday, 18 March 2019 14:35

How’s your farm’s food conversion efficiency?

Written by  Greg Jarratt, vet and director of Matamata Veterinary Services

Food Conversion Efficiency is often misunderstood and overlooked, despite its role in profitability.

FCE is a simple calculation that defines the amount of feed (grown and purchased) required to produce a kilogram of Milk Solids.

Top operators convert approximately 10 kg of Dry Matter to produce 1 kgMS while at the other end of the spectrum some farmers require in excess of 20Kgs of Dry Matter. 

This KPI (Key Performance Indicator) is a very important driver of profitability regardless of which farming system you are classified as (System 1 – System 5). In reality, it is the difference between those farmers that prosper and those that go broke.

So where do you start looking if milk production is not where you expect it for the feed provided? There is no simple answer, but paying attention to the following areas provides a good start.

Feed inputs – Are you actually providing what you think you are?

Pasture harvest is key and frequently overestimated, especially following conditions that lead to pasture damage such as heavy pugging or droughts. Often the most economical way to increase feed supply to cows is to focus on pasture management.

Feed wastage is also seldom properly estimated meaning the cows are receiving far less than budgeted for.

CSR (Comparative Stocking Rate) - represented in kg live weight per tonne feed supplied. 

It never ceases to amaze me when stocking rates in terms of cows per hectare are quoted. Given today’s large variations in inputs from farm to farm, this figure is about as useful as the proverbial on a bull.

In terms of CSR, there is a bit of a ‘sweet spot’ around 80 kg live weight per tonne feed supplied. Higher CSR’s indicate the farm is over stocked and a greater proportion of feed supplied to animals is partitioned towards maintenance of more animals resulting in less partitioning towards production. Lower CSR’s are also an issue as there is a limit to the amount of feed any cow can ingest.

BCS (Body Condition Score) – Cows that strip and gain excessive amounts of weight in a season are inefficient. 

In rough numbers cows short of feed 3 kgDM in a day will lose 1 kg live weight. To replace this weight approximately 5 kgDM will be required. How many farmers in their right mind would borrow $3 to pay back $5 a few months down the track? Not many that want to remain in business anyway!

Compensatory growth – poor doing heifers aim to convert feed into body mass over milk production (compensatory growth). 

Animal Health – as a Veterinarian, our cost to our clients is always topical. Unfortunately, while the cost of writing out a cheque on the 20th of each month is at the forefront of minds, what often gets lost is the unseen and unaccounted for losses that are incurred when ‘profit robbing’ diseases are rife within a herd. 

For example, Mastitis in terms of cost of treatments may incur a Vet bill of $30 – $50, but milk down the drain over 6 – 10 days of the treatment period may equate to 10 – 20 Kgs MS (depending on the stage of lactation). Using the FCE figures above this could be responsible for up to 400 kgDM (20 kgMS, requiring 20 kgDM per MS) ‘disappearing’ from the operation. Worse still, this loss cannot be measured or reported by any accountant or banker – regardless of how ‘good’ they may be. This does not account for increased likelihood of lower production through season or increased chance of culling!

In summary, while it is widely accepted there are ‘good’ and ‘bad’ operators within the dairy industry, the crucial KPI’s such as FCE are often misunderstood and overlooked. 

Making sure your ‘farm advisory team’ understands this ‘bigger picture’ and the drivers of farm profitability is a very important step.

• Greg Jarratt is a vet and director of Matamata Veterinary Services.

This article is brought to you by J. Swap Stockfoods.

More like this

National feed scheme launched for farmers

The Ministry for Primary Industries (MPI) and Federated Farmers have restarted the national Feed Coordination Service to help farmers recovering from Cyclone Gabrielle.

The worst is still to come

Driving from home base in the Horowhenua through Hawke’s Bay and up the East Coast, it’s pretty evident that feed for cows is in short supply and that ground is still wet.

Controlling feed costs

Everywhere I go, whether it be in town or on farm, I hear a similar topic being discussed. It’s the fact prices have risen and as a result farmers and growers have become very focused on controlling on-farm costs.

Home advantage for NZ dairy

Emma Higgins, Rabobank, says grain, oil and livestock feed are being caught up in the Ukraine war and producers in the northern hemisphere are going to face higher cost of milk production this year and into next year.

Featured

Machinery builder in liquidation

In what appears to be a casualty of the downturn in the agricultural sector, a well-known machinery brand is now in the hands of liquidators and owing creditors $6.6 million.

Two hemispheres tied together through cows

One of New Zealand’s deepest breeder Jersey herds – known for its enduring connection through cattle with the UK’s longest reigning monarch, Queen Elizabeth II – will host its 75th anniversary celebration sale on-farm on April 22.

An 'amaizing' season

It's been a bumper season for maize and other supplements in the eastern Bay of Plenty.

Leaders connect to plan continued tree planting

Leading farmers from around New Zealand connected to share environmental stories and inspiration and build relationships at the Dairy Environment Leaders (DEL) national forum in Wellington last month.

National

Frontline biosecurity 'untouchable'

Biosecurity Minister Andrew Hoggard has reiterated that 'frontline' biosecurity services within Ministry for Primary Industries (MPI) will not be cut…

Machinery & Products

New name, new ideas

KGM New Zealand, is part of the London headquartered Inchcape Group, who increased its NZ presence in August 2023 with…

All-terrain fert spreading mode

Effluent specialists the Samson Group have developed a new double unloading system to help optimise uphill and downhill organic fertiliser…

Can-Am showcases range

Based on industry data collected by the Motor Industry Association, Can-Am is the number one side-by-side manufacturer in New Zealand.