Feeding maize silage in winter: Setting the herd up for success
As I write this article, we have just had our first frost in the Waikato, a change in weather signalling that winter is upon us.
But extra care’s needed in ensiling to ensure what’s conserved is worth keeping, they stress.
“The first thing to check is whether there’s a genuine surplus,” says Dairy NZ’s productivity team leader, Rob Brazendale. “Those who monitor pasture growth will be able to identify that with their feed wedge.”
Any pasture heading for a cover exceeding 3200kgDM/ha before the next grazing is a likely candidate for taking out of the round and cutting when there’s a good forecast.
“One of the advantages at this time of year is the feed quality doesn’t deteriorate so quickly so you can be a bit more patient waiting for the weather.”
Another advantage is contractors are likely to have less work, so should be more flexible with timing, he adds. “You really need three days of clear weather forecast.”
Cutting a smaller area at any one time is advisable to reduce risk, but with smaller areas, filling pits completely may not be possible so making baleage and leaving the pit to the main cut may be a better bet, he suggests.
He also recommends using an inoculants – “one tested and proven in New Zealand conditions.”
Independent nutritionist and silage specialist Trish Lewis says the inoculant should be a fermentation enhancing one, as opposed to a stabilising type product. “You want an inoculant that’s got lactic acid producing bacteria in it that speeds up the fermentation.”
Whether to make pit or bale silage depends on what can be made best, she suggests. “Pit silage can go in slightly wetter, though modern balers are better at handling wet material.”
As always, rolling the pit to get air out, and sealing it well, is essential, but with wetter material care needs to be taken not to over pack it, she adds.
Taking silage now will not only start to rebuild feed reserves raided during last season’s drought, but will protect production down the track. “If you don’t [cut it], next time it’s grazed the pasture ME’s going to be down and the fibre up, and recently calved cows are already challenged with the amount of dry matter they’ll eat, so their energy intake will be even less.”
An option for those still calving is to give newly calved cows the first bite at any longer-than-ideal paddocks, then bring the remaining dry cows in to clean up. But for many that opportunity is almost past and ensiling surplus is now the way forward.
Lewis says she has one client, in Northland, who has already taken two cuts.
Talking to contractors in good time is vital, a point echoed by Rural Contractors Association president Steve Levet.
“If you are contemplating shutting up paddocks for silage at this time of year, make sure they’re your drier ones,” he told Dairy News.
“The other thing is health and safety. Make sure you tell the contractor about any hazards there might be in the paddock… stumps, tomos, lumps of concrete, holes, wet spots. If it’s under the grass you can’t see it.”
A forgotten waratah stake or hot-wire standard can seriously damage machinery, he adds.
