fbpx
Print this page
Friday, 25 February 2022 08:55

Aiming for top quality milk

Written by  Staff Reporters

Machine cleaning systems maintain milk quality by aiming to remove all milk residues from the plant and destroying any resident bacteria.

The benefits of selecting the right cleaning system include:

  • Increased milking efficiency: installing a well designed system will ensure efficient operation.
  • Reduced costs: installing the right system will keep operating costs to a minimum.
  • Automation of the cleaning process can be advantageous as it provides consistency of operation, eliminated human error, and prevents health and safety issues associated with handling strong chemicals and hot water.
  • If the cleaning process is automated the operator needs to periodically check the automation to ensure the plant is cleaning properly.

Machine cleaning requirements

An easy-to-operate method of cleaning the pit and milking platform is essential. Some larger dairies are installing automatic washing systems on their milking platforms. This is especially useful if the dairy is used for long periods of time.

Features of a cleaning system

A cleaning system should have the following features:

  • Adequately sized and configured wash line
  • Minimum flow rate of 3 litres/minute/cluster.
  • Flow rate through the first jette should not greatly exceed the last.
  • A flushing pulsator/air injector may be installed at the end of the milk line to ensure it is cleaned effectively. If the milk line is a loop line then a tap is installed near one of the milk line entries to the receiver with a flushing pulsator/air injector installed before the tap, at the top of the milk line. During washing the tap is closed and the flushing pulsator/air injector turned on.

Cause minimal liner stretch and distortion

  • A high flow, rapid dump hot water service to save time filling drums.
  • Ensure liners and jetters are compatible.
  • Circulation cleaning systems

This type of system is recommended for all dairies.

At the completion of milking, the clusters are connected to 'jetters' that are in turn connected to a wash line.

When the milking plant is turned on the vacuum created by the plant draws water from the wash tub through the wash line.

When hot washing, the water should be circulated through the plant for 5-7 minutes, or until it reaches the minimum dump temperature (about 55°C). This is done by connecting a recycle line from the delivery line to the wash tub.

To ensure effective cleaning a minimum water flow of 3 L/min is required through each cluster.

To clean the milk line effectively a flushing pulsator/air injector is normally needed. The flushing pulsator injects air and water into the milk line every 30-45 secs. This injection of water and air creates a turbulent flow of wash water through the milk line which helps to effectively clean the milk line.

More like this

Milk chilling partnership

Fonterra farmers can now lease next generation milk chilling technology and enjoy the many benefits that come with it.

Necessity is the mother of invention

John and Donna McCarty no longer use intermammary antibiotics for mastitis or dry cow treatment, which has saved them money and improved herd health.

Detecting mastitis

Properly detecting mastitis is a very important part of both control and treatment.

Featured

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

Editorial: Passage to India

OPINION: Even before the National-led coalition came into power, India was very much at the fore of its trade agenda.

National

Govt urged to reduce ETS units

The Climate Change Commission wants the new Government to reduce NZ Emissions Trading Scheme (ETS) auction volumes as son as…

Dairy sheep, goat woes mount

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand…

Machinery & Products

All-terrain fert spreading mode

Effluent specialists the Samson Group have developed a new double unloading system to help optimise uphill and downhill organic fertiliser…

Can-Am showcases range

Based on industry data collected by the Motor Industry Association, Can-Am is the number one side-by-side manufacturer in New Zealand.