fbpx
Print this page
Thursday, 28 July 2022 11:55

Milk-E hits the tanker tracks in Waikato

Written by  Mark Daniel
Energy Minister Megan Woods and Fonterra chief operating officer Fraser Whineray inspect Milk-E after the launch. Energy Minister Megan Woods and Fonterra chief operating officer Fraser Whineray inspect Milk-E after the launch.

A humble yet essential part of the supply chain; no one who travels the highways of New Zealand could have missed one of Fonterra’s milk tankers.

That fleet of 500 truck and trailers covers around 90 million kilometres each year, so you would expect the dairy co-operative to be actively looking at ways to reduce operating costs. Step forward the Milk-E.

At the launch of the company’s, and probably the world’s, first electric bulk milk tanker, chief operating officer Fraser Whineray – formerly of Mercury, a 100% renewable electricity company – noted the dramatic shift in transport over time from a 3.5 tonne flat-bed truck to the 46 tonne goliaths we see on the roads today.

Stressing the need to find sustainable solutions for Fonterra’s transport division, Whineray praised the co-funding from the Government’s Low Emissions Transport Fund (LEFT), which is administered by EECA (Energy Efficiency and Conservation Authority), in helping to fund the development that will ultimately reduction CO2, with fuels costs of only 30c per litre.

Developed at the Morrinsville Transport site that currently sees 11 staff build around 8 trucks and 30 trailers every year, the Milk-E has the same general dimensions as a classic milk tanker and will operate at the same GVM of 46 tonnes. Said to offer a range of about 140km, the total load will be 28,000 litres, about 2,000 litres less than a classic tanker, to accommodate the weight of the battery.

Taking around three hours to recharge, the truck will operate exclusively on the flat land surrounding the Waitoa plant in Waikato, offering flat terrain and shorts trips. The co-op is developing a battery swap system it says will only take 6 minutes, so the truck doesn’t sit idle during recharging.

Named by Fonterra farmer Stephen Todd from Murchison, Milk-E is part of Fonterra’s fleet decarbonisation work, one of several programmes helping the co-op towards becoming a leader in sustainability.

The cab and chassis were supplied by XCMG, a Chinese construction machinery group, with the build taking about 36 days, compared to a normal tanker that takes about 27 days to build.

In the 1930s, Waitoa was home to the biggest fleet of electric milk trucks, so it is fitting that it now becomes home to the first modern electric milk tanker in New Zealand.

10 Facts About Milk-E

1. Who chose the name?

Following a fierce but friendly 'Name the E-tanker' competition, which was open to Fonterra employees, farmers and the general public, the co-op settled for Milk-E.

2. How big is it?

It's about the same size as a regular tanker. It will operate at 46 tonne GVM (gross vehicle mass) with the trailer.

3. How far can it go?

It has a range of about 140km on a full charge (but this is still being tested).

4. What brand is it?

The cab and chassis are from XCMG - a Chinese construction machinery group. The team will fit the tank to it, which will be the same as with Fonterra's regular tankers.

Milk E Tanker FBTW

Fonterra's first electric milk tanker Milk-E.

5. Is this the first of its kind?

In New Zealand, yes. As for in the world, Fonterra isn't sure yet, they are still checking that out.

6. How much milk will it carry?

The tank will be the same size as on Fonterra's regular tanker with the capacity to carry 28,000 litres. However, because the truck part of the tanker is a bit heavier with the battery, it will carry around 2,300 litres of milk less, to keep within its permitted weight.

7. How long does it take to charge?

It will take about three hours to charge, and they will be operating it on a battery swap system so the truck isn't lying idle while charging. The team will be able to swap the battery out in about six minutes.

8. What will the trial measure?

A number of factors including how far it can go, how easy it is to charge, milk collection, maintenance, efficiency, cost, and driver comfort and safety. This is very much a trial with the aim of learning more about heavy vehicle E-transport in a rural setting.

9. Where will it be based?

At Fonterra's Waitoa plant, which has lots of close farms on relatively flat land, allowing shorter runs and lower battery consumption.

10. How long will it take to build?

The build took about 36 days. A normal tanker takes about 27 days to build, but this took a bit longer due to some of the new tech.

More like this

Fonterra posts solid results

Fonterra has delivered a solid half-year result, thanks to higher margins and sales volumes across the co-op's diversified product and category mix.

Featured

Sheep drench resistance costly

Analysis by Dunedin-based Techion New Zealand shows the cost of undetected drench resistance in sheep has exploded to an estimated $98 million a year.

Dairy sheep and goat turmoil

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand for their products.

Hurry up and slow down!

OPINION: We have good friends from way back who had lived in one of our major cities for many years.

National

Govt urged to reduce ETS units

The Climate Change Commission wants the new Government to reduce NZ Emissions Trading Scheme (ETS) auction volumes as son as…

Dairy sheep, goat woes mount

Dairy sheep and goat farmers are being told to reduce milk supply as processors face a slump in global demand…

Machinery & Products

All-terrain fert spreading mode

Effluent specialists the Samson Group have developed a new double unloading system to help optimise uphill and downhill organic fertiliser…

Can-Am showcases range

Based on industry data collected by the Motor Industry Association, Can-Am is the number one side-by-side manufacturer in New Zealand.