fbpx
Print this page
Friday, 03 March 2023 08:25

All-black tanker debuts in Mid-Canterbury

Written by  Mark Daniel
Irish-made effluent tankers, with capacity of 25,000 litres, are heading to mid-Canterbury. Irish-made effluent tankers, with capacity of 25,000 litres, are heading to mid-Canterbury.

Believed to be two of the largest effluent tankers built in Ireland, Conor Engineering of County Clare has recently shipped a duo of 30 cubic metre units, destined for the large paddocks of Mid Canterbury.

With capacities of 6,000 gallons or 25,000 litres, most of the statistics on the pair are plus-sized, as will be the contractor’s prime movers that will be tasked with hauling these heavy loads.
With liquid effluent typically 1,000kg per cubic metre, the 30 tonne load will be added to the tanker’s tare weight of around 7 tonnes, plus the prime movers weight, meaning they will only be destined for off-road applications when fully loaded.

Alongside their impressive physical statistics, the standard equipment hits some big numbers too, with a fast turnaround assured by a vacuum pump capable of 18,000l/min. This is augmented by an additional centrifugal pump mounted on top of the filler arm.

The company notes that high capacity pumps of this type, used in rapid-fill situations over short bursts, are prone to overheating, so the configuration includes an air/water cooling system with a radiator bank mounted next to the vacuum pump.

Up at the front end, the drawbar is fitted with a spring-damped hydraulic system, ball and spoon coupling, air brakes and complemented by a hand operated parking jack or easy attachment and removal.

Loading on one unit is via a direct-fill system, featuring an 8-inch pipe dropped directly into a holding, with a hydraulic bleed valve incorporated to drain the pipe when it is raised.

The second tanker is filled via a loading pipe that couples to a ground-based loading hopper, carried under the tanker body when not in use or during transit between jobs.

Equipped with a tri-axle system, using forced steering on the front and rear assemblies, the configuration is said to allow tight turns in confined spaces.

The tankers also incorporate a clever tank balance system, meaning the operator can empty from the rear of the tanker during downhill sections and return to front end emptying on level ground.

At the business end of the tankers, a four-section, the 12-metre boom and dribble bar assembly is carried on a three-point linkage system that allows the contractor to attach a separate shallow disc cultivator if the effluent needs to be incorporated. A clever boom unfold system works sequentially from the transport position, out into the full 12m working width.

The tankers are also pre-equipped with variable application technology, which the owner is considering for the future.

Taking around 3 months to build, followed by an estimated 10-week journey time to New Zealand, the purchaser is obviously keen to exploit the fertiliser value of effluent, having invested €360,000 ($615,000) in the machines – of course with an all-black colour scheme.

www.cochranes.co.nz

More like this

Tractor Sales Fall in Most Major Markets Ahead of EIMA 2026

The market is in decline in the United States, Canada and Brazil. In Europe, sales are falling in Germany, France and Spain. Turkey is experiencing a sharp decline, whilst the economic strategies and policies implemented by India and China are driving purchases in both countries.

Waikato Dairy Family Uses John Deere Precision Tech

Areare Farms, a dairy operation in the Waikato region spanning multiple properties and milking 760 cows, now has Jenna and her brother Brian Rogers, the third generation of the family business, working alongside their parents Phil and Jackie.

SAM e-Spreader Now Connects Directly to Tabula

Hamilton-based manufacturer SAM Machinery and Hawke’s Bay’s Tabula have joined forces to offer customers more ways to connect its spreaders with the technology they already use in the cab.

Claas Balers Turn 30

Claas built its first variable chamber round baler - the Variant 100 - in 1996, so 2026 marks 30 years and the fifth generation of the Variant name, recently complemented by the new Cerex Series introduced in 2025.

Featured

Students' Strobe Light Targets Nesting Birds in Tractors

During the nesting season, from September to December, industrious starlings can quickly build nests in the darker areas behind tractor and vehicle, usually close to hot engines, typically resulting in localised damage or in some cases complete write-offs.

NZ Tractor Deliveries Up 5% Year to Date to September

With the last couple of months having seen some potential tractor purchases put on hold with the impending election and continued input cost rises, year-to-date figures, ending September, has seen deliveries up around 5% over the same period in 2025, with a total of 2026 units.

MPI's Diana Reaich on Non-Tariff Barriers and Trade Access

The head of the Ministry for Primary Industries (MPI) trade and international relations group says New Zealand is well-positioned to secure trade access and compete internationally as the world becomes more complicated, demanding and uncertain.

National

Machinery & Products