fbpx
Print this page
Friday, 22 September 2023 12:55

DIY precision planters

Written by  Mark Daniel
A custom-built, eight-row, linkage-mounted precision planter for South Catlins-based ag contractor, Hamish Golden. A custom-built, eight-row, linkage-mounted precision planter for South Catlins-based ag contractor, Hamish Golden.

A custom-built, eight-row, linkage-mounted precision planter is enabling Hamish Golden, a South Catlins-based ag contractor, to direct-drill a range of forage crops without any loss in accuracy or yield potential.

The unit comprises eight Kinze 3005 row units, each fitted with Ag Leader’s high-tech SureSpeed metering and SureForce downforce regulation systems and mounted to a customdesigned three-point linkage tool bar, with 15 to 20-inch rowing spacing for different crops.

The unit comprises eight Kinze 3005 row units, each fitted with Ag Leader’s high-tech SureSpeed metering and SureForce downforce regulation systems and mounted to a custom-designed three-point linkage tool bar, with 15 to 20-inch rowing spacing for different crops. SureSpeed is an integrated 1.7 or 3-bushel hopper, singulation, metering and powered delivery system that achieves precise seed placement at any operating speed from 2 to 19 km/h, placing the seed in the furrow at the same speed as the tractor. SureForce automatically adjusts the downward or upward pressure in each row unit to maintain a consistent planting depth across varying soil types and planting conditions, using dual-acting hydraulic actuators that produce up to 295kg of downforce and up to 115kg of uplift. Both systems are controlled using the Ag Leader InCommand display, which also controls the tractor’s auto steering system.

The unit was constructed by long-standing friend, Spencer Marshall, who also operates a precision planting business each summer. The machine’s row units were sourced from the US, the SeedCommand equipment from Un Earth Ag in Rotorua and the display and steering systems from Advance Agriculture in Gore.

“All told, the planter cost about $225,000 to construct, excluding labour; more than you’d pay for a conventional planter, but there is nothing like it in the country,” Hamish says.

Finished in mid- November, the planter was immediately put to work planting a 2.7ha swede crop on Hamish’s 400ha family sheep and deer farm. The crop yielded about 20 t/ha, with test runs at speeds of up to 17 km/h achieving the same placement accuracy as the more usual drilling speed of 8 or 9 km/h. Hamish went on to plant 325ha of forage crops across 36 Southland and West Otago farms over a hectic eight-week period last summer.

“To be honest, it was a bit stressful trialling a new machine,” he says. “We have a few issues but two of them were my fault. Everyone held their breath for a few weeks, but the crop emergence was perfect.”

After working in the US, Spencer Marshall returned to NZ just as fodder beet was starting to take off. It had had to be precision planted but as the nearest contractor was 50km away, he saw an opportunity and set up his own contracting business in 2016. Today, Precision Direct Drilling plants more than 800ha of forage crops throughout Southland and West Otago each summer.

After working in the US, Spencer Marshall returned to NZ just as fodder beet was starting to take off. It had had to be precision planted but as the nearest contractor was 50km away, he saw an opportunity and set up his own contracting business in 2016. Today, Precision Direct Drilling plants more than 800ha of forage crops throughout Southland and West Otago each summer.

Spencer notes, “I specifically wanted a trailed machine for greater visibility in front of the tractor, a large hopper and the ability to direct drill a range of crops”.

Once again, each row unit is equipped with Ag Leader’s SureDrive electric drive and SureForce hydraulic downforce systems. SureDrive automatically adjusts the speed of the planter’s existing meter to maintain a constant planting rate around turns and precise end-ofrow shut-off. Each row unit is completely independent in terms of its metering and downforce.

“You can waste a lot of seed, particularly when you’re not working in a nice, squared-shaped paddock, so I estimate I’m easily saving 10% in seed costs for my clients.”

More like this

Tractor Sales Fall in Most Major Markets Ahead of EIMA 2026

The market is in decline in the United States, Canada and Brazil. In Europe, sales are falling in Germany, France and Spain. Turkey is experiencing a sharp decline, whilst the economic strategies and policies implemented by India and China are driving purchases in both countries.

Waikato Dairy Family Uses John Deere Precision Tech

Areare Farms, a dairy operation in the Waikato region spanning multiple properties and milking 760 cows, now has Jenna and her brother Brian Rogers, the third generation of the family business, working alongside their parents Phil and Jackie.

SAM e-Spreader Now Connects Directly to Tabula

Hamilton-based manufacturer SAM Machinery and Hawke’s Bay’s Tabula have joined forces to offer customers more ways to connect its spreaders with the technology they already use in the cab.

Claas Balers Turn 30

Claas built its first variable chamber round baler - the Variant 100 - in 1996, so 2026 marks 30 years and the fifth generation of the Variant name, recently complemented by the new Cerex Series introduced in 2025.

Featured

Students' Strobe Light Targets Nesting Birds in Tractors

During the nesting season, from September to December, industrious starlings can quickly build nests in the darker areas behind tractor and vehicle, usually close to hot engines, typically resulting in localised damage or in some cases complete write-offs.

NZ Tractor Deliveries Up 5% Year to Date to September

With the last couple of months having seen some potential tractor purchases put on hold with the impending election and continued input cost rises, year-to-date figures, ending September, has seen deliveries up around 5% over the same period in 2025, with a total of 2026 units.

MPI's Diana Reaich on Non-Tariff Barriers and Trade Access

The head of the Ministry for Primary Industries (MPI) trade and international relations group says New Zealand is well-positioned to secure trade access and compete internationally as the world becomes more complicated, demanding and uncertain.

National

Machinery & Products