increase font size
The Disco 1010 offers a maximum working width of 9.9m.
While many operators prefer mower/conditioners, German manufacturer Claas suggests than many still want to achieve high daily outputs and knock grass down quickly.
This has led to the company launching a new top model to its mower range, dubbed the Disco 1010, that offers a maximum working width of 9.9m, when paired with a the 3.4m front unit, or 9.7m with a more typical 3200F.
Rear overlap is adjusted by moving the position of the support pivot pins, while a sub 4m transport width is achieved by ‘Vector’ folding, using the hydraulic breakaway rams to tilt the mowers rearward to a 120-degree position.
Hydraulic end guards also keep transport dimensions tight by reducing the overall height on the 2.3 tonne rear mowers.
While the ‘Vector’ feature is not required on the smaller 8300 (8.10/8.30m) and 9500 (8.90/9.10m) models, they also benefit from design tweaks, such as the main gearbox being positioned 75mm rearwards to produce a flatter PTO angle between tractor and mower. In addition, this repositioning has also straightened the driveline out to the laterally mounted mowers.
Designed to allow safe operation safe operation and transport with tractors of 150hp/ four-cylinder class, the MAX CUT mower bed, can be operated at a PTO shaft speed of 850rpm, offering a diesel saving of up to 20 percent. Looking at the bed more closely, on the DISCO 1010, each mower bed has nine contra-rotating mower discs, while the wave-shaped, one-piece base plate is made of 5mm thick steel profile and creates a dirt-removing tunnel effect in connection with the skids.
 |
|---|
|
Class Disco 1010 folds while travelling. |
Designed to ease routine maintenance, on all DISCO disc mowers built after 2022, the caps and mower blades of the anti-clockwise rotating mower discs are also painted red.
As a result, replacement blades can be immediately assigned to the appropriate mower discs. The practical blade box is divided into three compartments for red and black replacement blades and used blades.
Like the two smaller working width models, the DISCO 1010 COMFORT can be parked both in the working or transport position after attaching the supports supplied.
Twin rotor swathers have become the ‘go-to’ for forming swaths to feed hungry harvesters and balers, however, the design layout often means that crop located between the two rotors is not picked up, turned over or incorporated into the swath formed for subsequent harvesting.
Operating large tractors became more expensive back in March due to the ongoing Strait of Hormuz conflict, meaning contractors had to introduce fuel surcharges and farmers had to adjust their budget forecasts.
Close to the Abel Tasman and Kahurangi National Parks, Motueka is known for apples, pear and kiwifruit orchards, alongside specialised crops such as hops. Indeed, that specialisation, saw the area being the New Zealand centre of the tobacco growing, until the early 1980s.
Can-Am has introduced its 2027 range of side-by-side vehicles (SSV) and all-terrain vehicles (ATV), including the industry leading Defender, the Maverick R and the hugely capable Outlander ATV, incorporating a host of advancements designed to deliver an exceptional riding experience.
With battery tools becoming more widespread and more importantly, productive and reliable, it was only time before we saw augers or post-hole borers.
LIC shareholders have elected a new North Island representative to the co-operative's Board, along with five representatives to its Shareholder Reference Group (SRG), following the company's Annual Meeting held in Invercargill.
Farmers across parts of Southland and South Otago are continuing to deal with difficult conditions after a prolonged run of wet weather, with pressure building around feed supply, stock management, pasture damage, farm infrastructure and everyday workloads.
Federated Farmers says it welcomes Labour's commitment to reviewing the Sharemilking Agreements Act, calling on other major parties to do the same.
For Canterbury dairy farmers Sian Meijer and Rick Wobben, wearable technology has become one of their most valuable on-farm tools - helping manage 1850 cows across an expansive, high-performing dairy operation while improving efficiency, mating outcomes and day-to-day decision making.
Fonterra has unveiled its annual results for the 2026 financial year, posting $27 billion in revenue and close to $20 billion returned to New Zealand farmer owners and unit holders.
The first major update to the Dairy Cattle Code of Welfare in more than a decade has been released, marking what DairyNZ describes as an important step in ensuring animal welfare standards continue to evolve alongside scientific evidence and on-farm realities.
