fbpx
Print this page
Friday, 17 September 2021 12:55

Choosing the right pump

Written by 
Numedic has introduced the HS series – a shore mounted, selfpriming range of pumps. Numedic has introduced the HS series – a shore mounted, selfpriming range of pumps.

Choosing the right pump for an effluent system is the key to ensuring a system works well and gives many years of reliable service.

Rotorua-based Numedic’s latest addition to its extensive pump range is the HS series – a shore mounted, self-priming range of pumps, with the ability to handle raw effluent and solids up to 35mm in diameter.

The HS pumps can deliver up to 8m lift on the suction side, while offering high pressure and flow rate performance, with the advantages of being a single stage, centrifugal pump with very low maintenance costs. The pumps are suitable for motor capacities ranging from 7.5kW to 18.5kW.

“HS series pumps are proving to be very popular, both for new shore mounted installations, and to replace existing pumps,” says director Marina Millar. “This is especially so in situations where there is no solids separation taking place, and farmers need a pump that can handle solids, alongside increased performance and extended durability. Our feedback is that farmers get more than expected in terms of performance with these pumps, and they can pump further afield without worrying too much about solid separation.”

www.numedic.co.nz

More like this

$52,500 fine for effluent mismanagement

A Taupiri farming company has been convicted and fined $52,500 in the Hamilton District Court for the unlawful discharge of dairy effluent into the environment.

Featured

AgriSIMA 2026 Paris machinery show cancelled

With the current situation in the European farm machinery market being described as difficult at best, it’s perhaps no surprise that the upcoming AgriSIMA 2026 agricultural machinery exhibition, scheduled for February 2026 at Paris-Nord Villepinte, has been cancelled.

NZ tractor sales show signs of recovery – TAMA

As we move into the 2025/26 growing season, the Tractor and Machinery Association (TAMA) reports that the third quarter results for the year to date is showing that the stagnated tractor market of the last 18 months is showing signs of recovery.

National

Machinery & Products

New pick-up for Reiter R10 merger

Building on experience gained during 10 years of making mergers/ windrowers, Austrian company Reiter has announced the secondgeneration pick-up on…

Krone EasyCut B1250 fold

In 2024, German manufacturer Krone introduced the F400 Fold, a 4m wide disc front mower, featuring end modules that hinge…