increase font size
The recently introduced Erth Engineering Agriseeder.
Those looking to use direct seeding to establish, rejuvenate or repair grass paddocks or plant catch crops might want to take a closer look at the recently introduced Erth Engineering Agriseeder.
Marketed by Ag and Civil Machinery Direct Ltd, a division of Waikato Tractors in Hamilton, the 3m, 24-row model features a galvanised, heavyduty, linkage-mounted frame that weighs in around 1,500kg. This carries three independent sections, each carrying eight coulters, mounted to the frame using 40mm heavy-duty torsional rubbers that help absorb shock loads, while also allowing more travel and flexibility.
Offering a row spacing of 125mm (5 inches), the coulter arms have 4.5mm Forge de Niaux boron steel soil engaging tips, followed by an angled and scalloped single-disc assembly, both combining to create a 7mm wide band, where the crumbled soil creates a microclimate offering the seed moisture and the seedling protection as it emerges.
Sales manager at Waikato Tractors, Ben Peters, says, “By direct drilling into a firm seedbed, seeds are positioned in the fertile areas of the upper levels of the soil profile, moisture is retained and stones and trash are left undisturbed, while the turnaround back to grazing is also reduced.”
As part of the standard equipment, an Autocontour system acts a secondary suspension, with the benefit of better ground following in undulating terrain. In operation, each coulter block is pushed downwards using individual hydraulic cylinders. Each of the cylinders is connected, so the downward pressure is equalised over the full width of the machine, despite undulating ground.
The system is also said to improve machine reliability by reducing loads on the frame mounting points and bearing assemblies throughout the machine.
Seed distribution is taken care of using a Kverneland-sourced system, with seed metering via a land wheel drive and fan-based pneumatic distribution, with seeds passing down individual pipes to the coulters.
The system features a 400-litre plastic hopper, accessed via a galvanised ladder to a loading platform with a safety rail. Fan speed and seeding information is displayed on a simple readout on the side of the seed hopper, while at the rear of the machine a full width flat roller is fitted for load distribution and consolidation post-seeding.
A range of options includes weight frames for difficult ground conditions, front and rear harrows for conventional tillage situations or improved seed covering in very dry conditions and a second hopper for use with double-entry coulters for fertiliser application at the same time as seeding.
Twin rotor swathers have become the ‘go-to’ for forming swaths to feed hungry harvesters and balers, however, the design layout often means that crop located between the two rotors is not picked up, turned over or incorporated into the swath formed for subsequent harvesting.
Operating large tractors became more expensive back in March due to the ongoing Strait of Hormuz conflict, meaning contractors had to introduce fuel surcharges and farmers had to adjust their budget forecasts.
Close to the Abel Tasman and Kahurangi National Parks, Motueka is known for apples, pear and kiwifruit orchards, alongside specialised crops such as hops. Indeed, that specialisation, saw the area being the New Zealand centre of the tobacco growing, until the early 1980s.
Can-Am has introduced its 2027 range of side-by-side vehicles (SSV) and all-terrain vehicles (ATV), including the industry leading Defender, the Maverick R and the hugely capable Outlander ATV, incorporating a host of advancements designed to deliver an exceptional riding experience.
With battery tools becoming more widespread and more importantly, productive and reliable, it was only time before we saw augers or post-hole borers.
Central Otago District Council (CODC) has voted against a plan to spread treated sewage sludge from Cromwell and Alexandra on farmland near Lauder, a decision Federated Farmers says reflects strong opposition from rural residents.
Pāmu has released its FY26 Integrated Annual Report, reporting a Net Operating Profit of $113 million, more than double the $49 million recorded in FY25.
Meat Industry Association data, released alongside the Red Meat Sector conference in Wellington, shows export value climbing across the US, China, UK and Canada.
Applications are set to open for the 2027 Zanda McDonald Award, a trans-Tasman award recognised for identifying and fast-tracking talented young leaders in agriculture and agribusiness.
The Royal New Zealand College of General Practitioners (the College) and Hauora Taiwhenua Rural Health Network are calling for investment in a proposed new training pathway for rural GPs, warning that many rural practices are struggling to recruit while a large share of the existing workforce nears retirement.
Synlait has swung to second-half profit as operations stabilise, but the dairy processor still posted a $75.4m annual loss.
OPINION: It seems Canterbury processor Synlait is still in the doldrums.
OPINION: Get offside with New Zealand First leader Winston Peters at your own peril.
